First start from the two sides and then the middle, starting from the edge of the bright strip. You can use objects such as scrap credit cards to insert and pull them out. If there is a gap, slowly remove it. Be slow! So as not to damage the paint surface.

Tips: Because this bright strip is pasted with 3M double-sided sponge tape, if you feel that it cannot be removed when you remove it, and you are not able to use a hair dryer to remove it while heating it, please buy two bottles. Fengyoujing (any brand is not limited), apply Fengyoujing in a circle around the edge of the sticking position, wait for 5 minutes, then use a credit card to remove it, if not, wait for 30 minutes, wait for the first time After the applied wind oil essence is absorbed, apply it again. If it is still difficult, just do it a few more times. And after disassembly, if there is any residual glue, wipe it clean with a soft cloth dipped in wind oil. After this operation, before pasting the new bright strip, please make sure that the wind oil essence has been removed. There are many methods, such as using detergent, alcohol, etc.

First in the middle and then on both sides. After making sure that the installation area is clean, tear off the adhesive tape on the back to expose the gray adhesive, and then find the correct position and stick it on. Never press the rubber surface hard at once, put it on gently first, take a look at the overall situation, and see that the position is appropriate. After confirming that it is correct, press firmly